manualshive.com logo in svg

Cortelco 2750, Инструкция пользователя, Страница: 44 / 61

Поделиться
Скачать
Cortelco 2750 Скачать руководство пользователя страница 44

6.15.2.

Timer Reset

Press the up arrow (^)button, which is found directly below the display.

6.15.3.

Elapsed Call Time (Previous Calls)

While the phone is on-hook and idle, press 

REDIAL

. The display will show the elapsed time of the 

previous call, along with its time and date. Use the right arrow button under the display to view the 
lengths of the previous five calls, along with their times and dates.

6.16.

Headset

Your 2750 is headset-ready. It comes equipped with a 2.5mm headset jack, and a built-in headset 
amplifier, along with a dedicated 

HEADSET 

button. To use this feature, plug a telephone headset with 

a 2.5 millimeter plug into the headset jack. There is no need to buy a headset with a separate amplifier. 
You can use your headset to make or answer an outside call, an intercom call or a page. Simply press 

HEADSET 

instead of lifting the handset. During a call, you may switch back and forth between 

handset, headset and/or speakerphone as much as you like.
If you wish to override automatic line selection, press the desired 

LINE 

button instead of pressing 

HEADSET

, and you will be connected to that line on the speakerphone. Then press 

HEADSET 

to 

toggle to the headset. Press 

HEADSET 

again to hang up.

6.17.

Directory Card

Remove the directory card and write down the names or telephone numbers associated with line 
numbers.

6.18.

Personal Directory

a. 

While the phone is on-hook and idle, press the “

#

” button. The display will read “

Directory

.”

b. 

Use the up and down arrow buttons below the display to view the personal directory entries.

c.

When the desired entry is displayed, you may dial it simply by lifting your handset, by 
pressing 

SPEAKER 

or 

HEADSET

, or by pressing a desired 

LINE 

button.

Note

: The directory is organized alphabetically. You may jump to your desired entry by pressing the 

corresponding dial pad number. For example, press the “5” dial pad button three times to jump to the 
first entry starting with “L”. You can then use the up and down arrow buttons to view the entries 
starting at that point.

6.19.

Pre-dialing

Pre-dialing allows you to enter a telephone number and check it in the display before it is dialed out. To 
make a pre-dialed call, enter the number using the dial pad while the telephone is on-hook, then lift the 
handset or press 

SPEAKER 

or 

HEADSET 

or press the desired 

LINE 

button. If you make a mistake 

while dialing the number, you can use 

DELETE 

to erase digits one at a time.

6.20.

Intercom Calls

You may place an intercom call by dialing the two-digit station number of the desired station. When 
you place an intercom call, your speakerphone turns on automatically. If the called station is set to 

INTERCOM RING

, you may speak to the station as soon as they answer.

If the called station is set to I

NTERCOM VOICE

 or 

INTERCOM HANDSFREE

, you may speak to 

the station after you hear the confirming tone.

38

2750 User Guide Version 1.3

Содержание 2750






























































Отзывы:

Нет отзывов