I
NSTALLING
Y
OUR
T
ELEPHONE
INSTALLATION
First connect the line cord. This phone is equipped with a USOC RJ11C
modular line jack. Insert one end of the supplied line cord into the cord jack at
the back of the telephone, and the other end into your telephone outlet.
ADJUSTMENTS
TONE/PULSE
The telephone is shipped with the dial mode selector set to the TONE mode.
For connection on rotary pulse systems, please switch the dial mode selector
to the PULSE mode.
RINGER VOLULME
You can adjust the ringer loudness by selecting HI/LO/OFF switch to the level
you prefer on incoming calls.
REDIAL/PAUSE
This telephone stores in memory the last number dialed (31 digits maximum).
You can redial the last number dialed by lifting the handset and pressing the
R/P button. It must be the first button pressed after lifting the handset to
activate the redial feature.
To use the Pause feature, press the P/R button while dialing your number to
insert a pause. This feature is used to insert a pause time for access on an
outside line when the telephone is used in a PBX system.
HOLD FUNCTION
This phone has an electronic HOLD function with LED indication. To place a
call on HOLD, press the “HOLD” button, and the HOLD LED lights, then hang
up the handset. To release the HOLD, Flash the Hookswitch, or pick up
another phone connected to the same line.
FLASH FUNCTION
Lets you get a new dial tone for dialing again or access “call waiting” services
for switching from one call to another.
5
