Cortalk uDL1 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 26

Cortalk uDL1 Скачать руководство пользователя страница 11

MOBILTEX® DATA LTD.

Calgary, Alberta

www.corTalk.com

TITLE:

uDL1 Configuration and Operation Guide

DOCUMENT NO.:

UDL1-MAN-001

SHEET:

11 of 26

REV:

1.07

4.2.2

Driver Installation

To prevent potential hardware driver issues in Windows, do not attach the uDL1 to the PC USB port before
installing the device drivers.

From the uDL Installer screen, click the “Install uDL1/2 USB Interface Drivers” button.

Note that to install drivers,

you must be logged into the PC with an account that has administrative privileges.

The following screen should

display. Follow the installation instructions presented by the driver installer application.

Figure 11 Driver Installation Screen

Once the driver installer completes, you may then plug in the uDL1 through the USB cable into an available USB port
on the PC.

4.2.3

Adobe Acrobat Reader XI

Adobe Acrobat Reader XI is provided on the installation media to allow viewing of the PDF version of the uDL1 manual.
If Acrobat Reader is already installed on the PC, it is not necessary to re-install it. To install Acrobat Reader, click on
the “Install Adobe Acrobat Reader XI” button on the uDL Installer dialog, and follow the instructions provided by the
Acrobat Reader installation application.

«
...
9
10
11
12
13
...
»

Содержание uDL1



























Отзывы:

Нет отзывов