Cortalk RMU1 Скачать руководство пользователя страница 2

Страница: 2 / 53

MOBILTEX® DATA LTD.

Calgary, Alberta

www.corTalk.com

TITLE:

RMU1 Installation and Configuration Guide

DOCUMENT NO.:

RMU1-MAN-001

SHEET:

2 of 53

REV:

1.14

RESTRICTED PROPRIETARY INFORMATION

This information disclosed herein is the exclusive property of Mobiltex

Data Ltd. and is not to be disclosed without the

written consent of Mobiltex

Data Ltd. No part of this publication may be reproduced or transmitted in any form or by

any means including electronic storage, reproduction, execution or transmission without the prior written consent of
Mobiltex

Data Ltd. The recipient of this document by its retention and use, agrees to respect the security status of the

information contained herein.

This document is intended for limited circulation.

The information contained in this document is subject to change without notice and should not be construed as a
commitment by Mobiltex

Data Ltd. unless such commitment is expressly given in a covering document. Mobiltex

and corTalk

are registered trademarks of Mobiltex

Data Ltd.

CURRENT REVISION APPROVALS (Revision 1.14)

Name

Location

Job Function

Signature

Date

Tony da Costa

Calgary

Engineering Manager

Jerry Chilibecki

Calgary

Director of Engineering

REVISION HISTORY

Rev

Start Date

Approval
Date

Description

Prepared By

1.00

Feb 7, 2014

Original issue.

Tony da Costa

1.01

Feb 10, 2014

Fixed bond diagram connections.

Tony da Costa

1.02

Mar 3, 2014

Updates for v1.01 firmware.

Tony da Costa

Jerry Chilibecki

1.03

Mar 27, 2014

Added regulatory compliance statements.

Tony da Costa

1.04

Apr 12, 2014

Updated programming interface pictures to match production devices.

Tony da Costa

1.05

June 10, 2014

Added separate DC/AC coupons measurement mode (v1.04+ firmware).

Added datalogger information (v1.04+ firmware).

Added AC mitigation transformer adapter information.

Tony da Costa

1.06

Oct 1, 2014

Added additional accessory information.

Tony da Costa

1.07

Mar 21, 2015

Added isolated digital input information.

Minor text edits.

Tony da Costa

1.08

May 4, 2015

Added information for RMU1-I variant.

Updated input specifications.

Tony da Costa

1.09

Jan 11, 2016

Added information on AC peak current detector mode.

Clarified datalogger operation.

Tony da Costa

1.10

Mar 21, 2017

Minor clarification to manual depolarization (coupon disconnect)
operation.

Tony da Costa

1.11

May 12, 2017

Added cellular information for regulatory approvals.

Tony da Costa

1.12

May 25, 2017

Added RMU1PGM-BT information.

Tony da Costa

1.13

Oct 4, 2017

Added test station flex information.

Added RMU1/2/3 programmer description.

Added additional parts to accessories table.

Tony da Costa

1.14

July 6, 2018

Added Single Bond CP39 measurement type (v1.14+ firmware)

Updated AC mitigation transformer list.

Tony da Costa

Содержание RMU1






















































Результаты поиска

Содержание RMU1

Отзывы:

Бренды по названию

Популярные бренды

Cortalk RMU1, Руководство по установке и настройке

Результаты поиска

Содержание RMU1

Отзывы:

Бренды по названию

Популярные бренды