CORSIVA YACHTING
12
7. ENGINE
The manufacturer leaves the derived hoses in engine
compartment so its dealer or customer could attache the
engine in the future. (see the photo).
To drive the boat, you should apply the motor with the
maximum power recommended by manufacturer of the
boat – max. 66,2 kW (90 HP). The engine might be with a
long column.
The engine should be in such a position so it wouldn’t allow the screw to cavitate. Cavitation
of screw reduces the engine efficiency and and in consequence the towing power. The
excessive diving of engine introduces additional resistance of hull, which reduces the sailing
speed.
CAUTION
Always follow the rules of maintenance and service included in the owner’s
book by the engine manufacturer, in particular:
✔
apply the suitable fuel or the mixture with the proper proportion of oil and
the fuel,
✔
check the level of fuel tank before starting the engine,
✔
after starting the engine check if cooling water is carried away through the
exhaust,
✔
do not make any noise or waves in the harbor, do not exceed the speed
limit,
✔
follow the manufacturer’s instructions while usage, maintenance and winter
storage of the yacht,
✔
do not use the engine with power exceeding the acceptable power of the
boat.
CAUTION
Carry out the inspection of driving screw after its intensive exploitation. It will
prevent its damage, let you keep the screw in good state and lengthen the
vitality of engine.
Sailing to the shallow shore, especially from a stern side can lead to damage or
loss of the lower part of the engine.
Содержание 650 TENDER
Страница 1: ...Manufacturer Corsiva Yachting http corsiva pl ...
Страница 10: ...CORSIVA YACHTING 9 5 STABILITY AND BUOYANCY ...