CorroVenta WS4 ES, Руководство пользователя, Страница: 5 / 18

© Corroventa Ltd. 2017.02 3 (15)
Manufacturing Directive
The Corroventa WS4 ES is CE approved.
Waiver of Liability
Faulty, incorrect installations and/or incorrect use can cause damage to property and human injury.
The manufacturer assumes no responsibility or liability for damages or injuries caused by non-
compliance with the instructions herein, use for other purposes than the intended, or failure to
observe its warnings. Such damage, injuries or liabilities are not covered by the product warranty.
The product warranty does not cover consumables or normal wear and tear.
It is the responsibility of the buyer to inspect the product at time of delivery and before use to ensure
its good function. The product warranty does not cover damage resulting from use of faulty products.
Changes or modifications to the equipment must not be made without written consent by
Corroventa Avfuktning AB.
The product, technical data and/or installation and operation instructions can be changed without
prior notice.
This manual contains information that is protected by the Intellectual Property laws. No part of this
manual may be copied, stored in an information system or transferred in any form or in any way
without the written consent of Corroventa Avfuktning AB.
Any comments on the contents of this document shall be sent or addressed to:
Corroventa Avfuktning AB
Tel.+46 (0) 36-37 12 00
Mekanikervägen 3 Fax+46 (0) 36-37 18 30
564 35 Bankeryd, SWEDEN E-Mail mail@corroventa.se