© Corroventa Ltd.
2017.07
26 (27)
5.
Carefully remove the collection
receptacle.
If necessary, the cover can be
unclipped from the collection
receptacle. This facilitates cleaning
and access to the overflow sensor.
6.
Then start reassembling the machine:
1.
Clip the cover onto the collection
receptacle, if removed. Ensure
that the overflow sensor moves
freely and easily.
2.
Carefully reinstall the collection
receptacle in the machine, ensure
that the hooks on the rear of the
cover engage.
3.
Install the filter grille, ensure that
it aligns in the hooks at the bottom
of the collection receptacle.
Reinstall the 4 mounting screws.
4.
Carefully reinstall the
condensation water filter. Ensure
that the filter slides in under the
locating hooks in the collection
receptacle.
5.
Carefully replace the air filter,
ensure it is inside the support edge
and seals tightly.
Accessories and consumables
The following parts are available as accessories and consumables for K3 ES HP:
Part number
Designation
1002406
Condensation water filter
1002412
Process air filter
Содержание K3 ES HP
Страница 1: ...K3 ES HP CONDENSING DRIER USER MANUAL ...
