CORRECT CRAFT LINC PANORAY 2020, Руководство пользователя

Страница: 38 / 88

LINC PANORAY
38
3 EVENT WATERSKIING
EVENTS - TRICK RECREATION
The image above shows a screenshot in the “Trick Recreation” event. The “Trick
Recreation” event unlocks additional settings, like the run timer; please note
WKDWRɝFLDOWRXUQDPHQWVVKRXOGQRWEHUXQLQWKLVHYHQW7KHVFUHHQVKRWDERYH
is showing that the operator is 1) on the Home Menu, Main tab and 2) is on the
Event Details tab on the right side of the screen.
The “Trick Recreation” event will display the following items on the Main tab on
the Home Menu (left side of screen):
Pull Type - this setting determines how the engine will react to a skier’s
pull in order to accelerate/decelerate according to the skier’s preference.
A1 through A3 will give the skier a soft pull, B1 through B3 will give the
skier a moderate pull, and C1 through C3 will give the skier a hard pull.
Plus Setting WKLV2Q2΍VHWWLQJLVLQFOXGHGLQWKH3XOO7\SHSRSXS
menu. The plus setting is for heavier/stronger skiers who are looking for
a faster start and quicker throttle response. This setting is independent
of the Pull Type setting, but works in conjunction with Pull Type.
Hydrogate - this setting determines the Hydrogate position at the rear
RIWKH\GURJDWHZLOOSURYLGHDȵDWWHUZDNHLIVHWWRȊVODORPȋ
and will provide a larger wake if set to “trick”.
Run Timer - this is a timer that the driver can use as a stopwatch for
training purposes. Press to start the timer, press to stop when the timer
is running, and press and hold to reset the timer back to 0.0 seconds.
The stopwatch will have an audible 5-beep chime when the timer
reaches 20.0 seconds.
FIG. C6 - SCREENSHOT OF “TRICK RECREATION” EVENT (W/ OPTIONAL BALLAST EQUIPPED)