Coronis Wavenis Wavecard Скачать руководство пользователя страница 2

Страница: 2 / 70

Wavecard-Waveport User Manual

Coronis Systems

CONTRIBUTORS

Written by Romain Chapuis. Contributions by Michael Modjeska.

solely for use in developing products and software applications for Wavenis technology. Coronis Systems

reserves the right to revise this documentation and to make changes in content from time to time without

obligation on the part of Coronis Systems to provide notification of such revision or changes.

CORONIS SYSTEMS MAKES NO REPRESENTATIONS OR WARRANTIES THAT THE

DOCUMENTATION IS FREE OF ERRORS OR THAT THE DOCUMENTATION IS SUITABLE FOR YOUR

USE. THE DOCUMENTATION IS PROVIDED ON AN “AS IS” BASIS. CORONIS SYSTEMS MAKES NO

WARRANTIES, TERMS OR CONDITIONS, EXPRESS OR IMPLIED, EITHER IN FACT OR BY

OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES, TERMS, OR

CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND SATISFACTORY

QUALITY.

TO THE FULL EXTENT ALLOWED BY LAW, CORONIS SYSTEMS ALSO EXCLUDES FOR ITSELF AND

ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING

NEGLIGENCE), FOR DIRECT, INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE

DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF

INFORMATION OR DATA, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH

THIS DOCUMENTATION, EVEN IF CORONIS SYSTEMS HAS BEEN ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES.

Wavenis is a registered trademark, and Wavecard and Waveport, the Coronis Systems logo, and the

Wavenis logo are trademarks of Coronis Systems or its subsidiaries. All other product and brand names may

be trademarks or registered trademarks of their respective owners.

November 2005

For more information please visit these web sites:

www.coronis-systems.com

www.wavenis.com

For inquiries, please write to

[email protected]

, or contact one of our regional offices directly:

France

Coronis Systems, S.A.

Le Millénaire

290 rue Alfred Nobel

34000 Montpellier

France

Tel. +33 467 22 66 70

Fax +33 467 22 66 71

USA

Coronis Systems, Inc.

76 Bedford Street #33

Lexington, MA 20420

USA

Tel. 1-847-430-8080

Fax 1-847-720-4405

Germany

Paul-Lincke-Ufer 25

10999 Berlin

Germany

Tel. +49 30 616 210 60

Fax +49 30 698 166 81

CS-SUP-MUTI-WPORTAPP-E04

Содержание Wavenis Wavecard







































































Результаты поиска

Содержание Wavenis Wavecard

Отзывы:

Похожие инструкции для Wavenis Wavecard

Бренды по названию

Популярные бренды

Coronis Wavenis Wavecard, Руководство пользователя

Результаты поиска

Содержание Wavenis Wavecard

Отзывы:

Похожие инструкции для Wavenis Wavecard

Бренды по названию

Популярные бренды