Thank you for purchasing our burner controller.
○
○
RCF15 is exclusively used for 24-hour or less batch type combustion equipment.
○
○
The Combustion/Alarm indicator LED illuminates at combustion.
○
○
○
If system lockout occurs, it cannot be restarted until the reset button of RCF15 is pressed manually.
○
Do not press the reset button too hard. Otherwise the button may be damaged.
●
Symbols and meanings for safety in this instruction manual are as follows.
* Items with CAUTION may also result in serious consequences depending on the situations.
All the descriptions with both symbols are important contents. Be sure to observe them.
RCF15 does not start in case of circuit failure of the inside or outside of the burner controller,
or false flame signal detection at operation start.
PRECAUTIONS FOR SAFETY
i
The following
are important items for safe use.
Be sure to read them before installation and start of use.
INTRODUCTION
FEATURES OF THE PRODUCT
This instruction manual should be read and understood before use by personnel who are in charge
of design and/or maintenance of operation panels and/or equipment using RCF15.
The burner controller RCF15 is exclusively used for gas-fired combustion equipment with
combustion rate of 175 kW or less.
The product is a combustion safety control device to control the equipment safely if any
misoperation or trouble due to malfunction occurs.
The Combustion/Alarm indicator LED blinks at ignition failure (misfire), detection of a false
flame signal, or flame failure.
Indicates that mishandling the product may result in death or serious
injury to the user.
WARNING
CAUTION
Indicates that mishandling the product may result in injury to the user,
or physical damage.
