○
Ignition trial
Operation to ignite the burner.
○
Flame detector
Device to detect a flame and issue an signal.
○
False flame (Signal)
○
Batch operation
Operation that combustion equipment starts/stops once or more times within 24 hours.
○
Flame response
○
Prepurge
Purge to be performed between a startup signal and start of the ignition device.
○
Post-ignition
○
Lockout
Corona Corporation
〒
555-0021
Contact Us for Products
☎
: +81-6-6471-8141
Fax : +81-6-6471-5826
E-mail : [email protected]
http : www.coronajapan.net/
[Note]
* The contents of this document are subject to change without notice.
Operation where ignition sparks are not stopped immediately but kept for a fixed
period of time to make flames stable when the pilot burner ignites.
A safety shutoff state of the system where the system cannot be restarted unless
the system is reset manually.
2-5-43 Utajima, Nishi Yodogawa-ku,
Osaka, Japan
A signal of flame detected by the flame detector in the duration where flame
generation is not allowed at burner start.
Time from the occurrence of a signal that a flame goes out is issued to the
occurrence of a signal that the safety shutoff valve to supply gas fuel is closed is
issued.
March 2015
Initial Issue
Terms
