corob FIRST 70, Руководство пользователя

Страница: 32 / 40

28 - USING THE DISPENSER
COROB™ FIRST 70
8. Update the colorant level value for the topped up canisters in the machine management software (refer to
the software user’s manual).
WARNING
In case of improper actions, which caused canister overfilling with colorant:
• In case the colorant has poured inside the machine, do not try to clean; turn the machine off at once and
contact an authorized service center.
• If, on the contrary, the product has already poured out of the canister, it is necessary to shut off the
machine immediately and clean with paper or a moistened cloth. Whenever possible, leave the colorant to
dry itself and remove with a spatula.
• If the product has not yet come out of the canister borders, it is necessary to avoid closing the canister
with its lid and provide immediately to dispense the exceeding colorant until the correct level is reached.
Clean carefully the upper border of the canister with paper or a moistened cloth before closing it with the
lid.
NEVER USE WATER OR SOLVENT-BASED CLEANING PRODUCTS TO CLEAN THE MACHINE.
DANGER
When using colorants containing volatile solvents the canister top up must be carried out opening one
canister at the time.
WARNING
Failure to update the colorant levels in the canisters may compromise the accuracy of the hue produced or,
worse yet, lead to emptying the machine canisters and circuits.
If “SOLVENT FREE” colorants are used, or those that dry out quickly, we recommend that you keep the
canisters full at all times by topping up frequently.
After topping up the colorant, it is advisable to carry out the stirring process using the functions provided in the
management software, to eliminate any air that may be emulsified and incorporated into the colorant.
Here below you will find a reference diagram to perform canister filling.
MAX
2.5 l
2.6 qt
1.8 l
1.9 qt
2 l
2.1 qt
1.2 l
1.3 qt
0.5 l
0.5 qt
Figure 13