USING THE DISPENSER - 25
ORIGINAL INSTRUCTIONS
6.3.3
Loading the can - Automatic Shelf
With the purpose to prevent any crushing risks, the machine is fitted with two safety plates (chapter
2.4). The safety plates intervene by causing the shelf to stop if they are inadvertently touched by the
operator.
Place the can on the shelf. Use the tipping panel roll conveyors, if present, to ease heavy cans on the
1.
shelf.
MAX
MIN
The management software controls the movement of the automatic shelf, checks for the can presence and that
the can placed on it is actually the one selected by the software for dispensing the formula.
These checks are also carried out by a photocell located underneath the nozzle center. The shelf automatically
stops when the can is detected by the photocell.
After a can has been positioned, the management software will indicate an error if the can is missing from the
shelf, or if it is larger or smaller than the one selected for dispensing.
6.3.4
Use of the Bung Hole Locator
After having correctly positioned the can so as to obscure photocell
1.
A
, the laser beams will switch on.
Position the can in such a way that the hole on the lid is in the center of the laser beams.
2.
1
2
A
