3
4.0. TROUBLESHOOTING GUIDE / SERVICE
Be sure to disconnect the shaker from the main power source immediately in case of any signs of
malfunction and contact Corning Customer Service immediately at:
1.800.492.1110 (for toll-free calling within the U.S. and Canada)
1.978.442.2200 (outside the U.S.), or
Contact your local Corning support office listed in the back of this manual.
Problem
Explanation / Solution
POWER key doesn’t light up Check the power connection, Check fuses
Call Corning Customer Service
Shaker does not START
Check the power connection, Check fuses
Call Corning Customer Service
5.0. ROUTINE MAINTANCE / CLEANING
No routine maintenance or lubrication is required.
It is recommended that the shaker is kept clean.
5.1. CLEANING
The outside housing can be cleaned with a soft, damp cloth when needed.
Do not use any corrosive or abrasive cleaners (acetone, polish etc.) This may permanently damage the
shaker finish.
Before cleaning the shaker, always unplug the power cord from the wall socket!
6.0. SERVICE AND REPAIR INFORMATION
If you have a question about the Corning
LSE
Low Speed Orbital Shaker or have a service inquiry,
contact Corning Customer Service immediately at:
1.800.492.1110 (for toll-free calling within the U.S. and Canada)
1.978.442.2200 (outside the U.S.), or
Contact your local Corning support office listed in the back of this manual.
Before returning any unit for service, a Return Authorization (RA) number must first be obtained.
Equipment sent in without out prior authorization will be returned at the customer’s expense. When
returning a unit to Corning for service, it should be sent in the original packaging. If this is not possible, be
sure that the unit is sufficiently packed. Any damage resulting from improper packaging is the
responsibility of the customer. A written explanation should accompany the unit along with the RA
number.
