
Professional applications
15
14
Installation
Before installing
Make sure that the wall structure is solid and can support the weight of the speaker.
Also, make sure that you comply with all local health and safety regulations.
As the speaker is pre-angled, coverage can be adjusted by positioning the cabinet
higher or lower in the room - horizontally or vertically - until the desired coverage is
obtained. See below:
Installing the speaker
Vertical on wall away from the corner
1. Remove front cover
2. Mount speaker cable
3. Place speaker at desired position
4. Mark drilling positions on wall using only the
mounting holes at one side of the cabinet
5. Drill holes in wall
6. Reposition speaker at desired position and
mount the screws
7. Reinstall front cover
Two speakers vertical or horizontal
on wall or ceiling
1. Remove front cover
2. Mount speaker cables
3. Screw one side of the cabinets together using
9mm bolts with 4mm diameter.
4. Repeat steps 3 to 6 from above.
Corner position
1: Remove front cover
2: Mount speaker cable
3. Place speaker at desired position
4: Mark drilling positions on wall by
shading through the mounting holes
behind the front cover
5: Drill holes in wall
6: Reposition speaker at desired position
and mount the screws
7: Reinstall front cover
One speaker horizontal on wall or in
“under balcony” applications
1. Remove front cover
2. Place speaker at desired position
3. Mark drilling positions on wall using only the
mounting points in one side of the cabinet
4. Lower the hook on the bracket into the
middle mounting hole in cabinet and pull it
towards wall or ceiling.*
5. Mark mounting position through the bracket
screw hole.
6. Drill holes in wall or ceiling
7. Mount the speaker cables
8. Reposition speaker at desired position and
screw the cabinet and bracket into the wall
or ceiling
9. Reinstall front cover
*How to mount the bracket, please refer to
illustration on page 10
Remove the front cover
The front cover is fastened with magnets.
Remove it by pushing on it from one
side and pull it outwards
Pull grill out
<
Push on side of grill
<