Cornell SGHNX-10011E, Инструкция по установке и руководство по эксплуатации

Страница: 6 / 37

5
SGHNX Series
REVISION # 0000
DATE: 03/07/2017
OPERATOR MOUNTING
1. Before the operator is installed, verify that the door is properly operating and balanced.
2. Make sure the layout of the mounting holes on the bracket are correct.
3. Bolt the operator mounting plate to the door bracket plate.
4. Attached and tighten the three mounting legs to the mounting plate. (Not applicable for 1hp, 1½hp,
2hp)
5. Finally, mount the operator to the three legs and tighten (for 1/2 and 3/4hp only). For other
horsepowers, mount the operator to the mounting plate.
(Figure 1 for 1/2hp and 3/4hp)
(Figure 2 for 1hp and 1½hp)