Cornell CFN-T122GY, Руководство пользователя

Страница: 3 / 5

3
8. Ensure latches on either side of the rear grille are open. Place front and rear grille
together and close the side latches. If they do not fit securely together, repeat the
procedure.
OPERATING INSTRUCTIONS
Place the fan on a safe flat surface where it cannot fall or be pulled by the cord. Plug
fan into a 220-240V 50-60Hz outlet and follow the operating instructions:
This fan is equipped with three fan speeds to allow for optimal air comfort.
0- Pressing this button will power the fan OFF.
1- Pressing this button will power the fan ON at LOW speed setting.
2- Pressing this button will power the fan ON at MODERATE speed setting.
3- Pressing this button will power the fan ON at HIGH speed setting.
This fan has two functions which will allow you to better customize your preferred
air comfort as well as improve the air circulation in the room:
OSCILLATION: To activate the oscillation function for widespread breeze distribution,
simply press the oscillation knob down (located on top of the fan’s motor house). To turn
off the oscillation function for a targeted breeze setting, pull the oscillation pin up.
Controlling the oscillation can be done while the fan is operating.
TILT: To tilt the fan head so that the breeze is targeted at an angle, steady the base of the
fan with one hand and grip the motor housing with another, carefully tilt the head of the
fan until it reaches the desired angle. Be careful as to not tilt the head back further than it
is intended to go, doing so will damage the unit.
CAUTION: TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT, FULLY INSERT.
CLEANING INSTRUCTIONS
1. Always disconnect the cord from the electrical outlet when cleaning your fan.
2. Light accumulated dust may be removed by using a soft cloth to wipe away the dust
at the back grille of the fan.
3. Wipe the exterior surfaces of the fan occasionally with a damp cloth (not dripping wet)
and dry thoroughly with a soft dry cloth before operating the fan.
4. Do not use harsh cleaners or materials to clean this unit, doing so will cause damages
to it.
OPERATING INSTRUCTIONS
CLEANING INSTRUCTIONS