Cornell CFN-T122GY, Руководство пользователя

Страница: 2 / 5

2
PLEASE READ AND SAVE THESE INSTRUCTION
Figure 1 illustrates parts of this fan. Upon removing fan from the package, checks to
make sure all parts are complete.
1. Attach fan base to fan body using 4 screws included.
2. Place fan base on firm stable surface such as a table or counter top.
3. Discard the plastic sleeve from the shaft.
4. Secure the rear grille to the motor housing with the plastic nut. The handle should
be at the top. Turn clockwise to tighten.
5. Slide the blade onto the shaft pin, pushing it on until it is firmly in place.
6. Test blade operation by rotating it with your hand. There should be no friction
with the other parts. If blade does not rotate freely, repeat steps 4-5.
7. Place blade cap on shaft pin and turn counterclockwise until tight.
ASSEMBLY
Retaining
Pin
ＲＡＴＥＤ ＶＯＬＴＡＧＥ
ＦＲＥＱＵＥＮＣＹ
ＩＮＰＵＴ ＰＯＷＥＲ
２２０－２４０Ｖ
５０Ｈｚ
５５Ｗ
SPECIFICATIONS