OPERATING INSTRUCTIONS
MAINTENANCE
11
10
B. setting the baking completion time (23 hours and 59 minutes max)
Press the function button repeatedly until the square symbol above ( ) flashes, and set the end
time of baking;
switch on the oven immediately, the square symbol above ( ) begins to flash. When it reaches
the time set, baking procedure will switch off automatically. The square symbol above ( ) flashes,
the alarm will ring, and the square symbol will flash. To stop the alarm, press any button.
The set baking procedure could be seen by pressing any function button repeatedly at any time, only
if the time frame of baking is at “0” position. By adjusting the baking completion time to the current
time, the set baking functions can be cancelled.
timer
The longest time frame that can be set is 23 hours and 59 minutes. For setting timer, press the
function button repeatedly until the square symbol above ( ) flashes, and press “+” or “–” button
until the desired time is displayed. After setting, the proper time (hour, minute) and the square symbol
above the ( ) begins to flash. In addition, the timer countdown begins to work. When it reaches the
set time, the square symbol above the ( ) flashes, and the alarm will ring, and the square symbol
will flash. To stop the alarm, press any button. Clock time (hour, minute) will disappear.
After power resumes, “12:00” and the square symbol above ( ) will be displayed. simply reset
again.
the oveN lIght
set knob “B”to the ( ) symbol to turn it on .It lights the oven and stays on when any of the electrical
heating elements in the oven come on.
coolINg veNtIlatIoN
This model is equipped with a cooling fan, which activates automatically to cool the oven’s exterior.
When the fan is on, a normal flow of air can be heard exiting between the oven door and the control
panel.
Note:
When cooking is completed, the fan stays on until the oven cools down sufficiently.
Before cleaning your oven, or performing maintenance, disconnect it from the power supply.
To extend the life of your oven, have it cleaned frequently, keeping in mind that:
• the enamelled or stainless steel parts should be washed with lukewarm water without using any
abrasive powders or corrosive substances which could ruin them; stainless steel could get
stained. If these stains are difficult to remove, use special cleaning products available in the
market. After cleaning, it is advisable to rinse and dry thoroughly.
• the oven’s interior should preferably be cleaned immediately after use, when it is still warm with
hot water and soap; The soap should be rinsed away and the interior dried thoroughly. Avoid using
abrasive detergents (for example cleaning powders, etc) and abrasive sponges for dishes or acids
(such as lime scale –remover, etc.) as these could damage the enamel. If grease spots and dirt
are particularly difficult to remove, use a special oven cleaning product. Follow the instructions
provided on the packet. Never use a steam cleaner to clean the insides of the oven.
• if you use your oven for an extended period of time, condensation may form. dry it using a soft
cloth.
• there is a rubber seal surrounding the oven opening which guarantees its perfect functioning.
Check the condition of this seal regularly. If necessary, clean it and avoid using abrasive products
or objects to do so. If damaged, please contacts your nearest After-sales service Centre. We
recommend you avoid using the oven until it has been repaired.
• never line the oven bottom with aluminium foil, as the consequent accumulation of heat could
compromise the oven’s performance and even damage the enamel.
• Clean the glass door using non-abrasive products or sponges and dry it with a soft cloth.
removINg the oveN door
For a more thorough clean, you may remove the oven door. Choose the assembling and
disassembling method according to different models. Proceed as follows:
oven door (type 1) remove and assemble procedure:
• Open the door fully
• Lift up and turn the small levers situated on
the two hinges
• Grip the door on the two external sides.
shut it slowly but not completely
• Pull the door towards you, pulling it out of
its seat
Reassemble the door by following the above procedures backwards.
oven door (type 2) remove and assemble procedure:
• Open the door fully
• lift up and turn the small levers located on
the two hinges;
• Grip the door on the two external sides
and close it approximately half way.
Unlock the door by pressing on the
clamps F, and then pull the door towards
you lifting it out of its seat. To replace
the door, reverse this sequence.
replacINg the oveN lamp
• disconnect the oven from the power supply by means of the omni
polar switch used to connect the appliance to the electrical mains;or
unplug the appliance if the plug is accessible;
• Remove the glass cover of the lamp-holder;
• Remove the lamp and replace with a lamp resistant to high
temperatures (300°C) with the following characteristics:
n
Voltage: 220-240V
n
Wattage: 25W
n
Type: E 14
• Replace the glass cover and reconnect the oven to the mains power supply.
3
2
1
F
F
Type 1
Type 2
CBO-656IX(210311)FA_Layout 1 3/21/11 10:27 AM Page 6