Cornelius CMP 600-30, Руководство по обслуживанию

Страница: 13 / 26

CMP600-30 Icemaker Dispenser Service Manual
© 2004-2014, Cornelius Inc. - 9 - Publication Number: 630460050SER
T
O
R
EPLACE
W
ATER
L
EVEL
S
AFETY
S
WITCH
!
WARNING:
Disconnect power to the unit before servicing. Follow all lock out/tag out procedures established by the user. Verify all
power is off to the unit before performing any work.
Failure to comply could result in serious injury, death or damage to the equipment.
1. Unplug the ice dispenser from electrical outlet.
2. Unplug Molex connector connecting switch to electrical box.
3. Remove the 2 screws anchoring the water level safety switch to the bottom of the water level control mounting
bracket.
I
CE
L
EVEL
C
ONTROL
The ice level control assembly is secured to the top of the ice storage container cover. The cover is secured to the
storage container with four screws. The level control switch is operated by a plate assembly located beneath the
diaphragm. When the plate assembly is down due to lack of ice in storage container, electrical impulse is sent to
compressor, starting the ice making cycle. As ice level increases in storage container, the plate assembly is pushed
up. When storage container is full, it deactivate the switch, stopping the compressor and ice making cycle. The
operating positions of the switch is fixed, no adjustments are necessary. If switch replacement becomes necessary,
simply disconnect cable at connector, remove wires from switch.