4
.
Remove the lid and clean any remaining part on the
opening.
Figure 8.
5
.
Place the 28" bar from the kit in the front pocket as
shown in Figure 9.
For the 3
0
" ice maker turn the spacers on the end of
the bar to face down. Apply RTV on each end of the
bar to fill gap between bar and hopper as shown in
Figure 10.
For a 22" ice maker turn the spacers on the end of
the bar to face upwards and use (2) front to rear bar.
Apply RTV on each end of the bar to fill gap
between bar and hopper as shown in Figure 11.
Figure 9.
Figure 10.
Figure 11.
6
.
Add
some
RTV (Silicon), all around the exterior
line, as shown. Place the cut lid on top of the ice bin.
Figure 12.
Adapter Lid For 255/215 - Installation Instructions
Publication Number: 548000078INS
-
5
-
©
2021
,
Marmon
Foodservice Technologies, Inc.
SPACER
