Cornelius Adapter Lid Скачать руководство пользователя страница 2

Adapter Lid For 255/215 - Installation Instructions

Publication Number: 548000078INS

- 2

 

-

©

 2021

Marmon

 

Foodservice Technologies, Inc.

S

AFETY

 I

NSTRUCTIONS

!

WARNING:

Before starting installation, read and understand all safety label and warnings on the machine. Also review and 
understand all safety instructions in the owners, installation and service manuals.

Failure to comply could result in serious injury, death or damage to the equipment.

Q

UALIFIED

 S

ERVICE

 P

ERSONNEL

!

WARNING:

Only trained and certified electrical, plumbing and refrigeration technicians should service this unit.

All wiring and plumbing must conform to national and local codes. Failure to comply could result in serious injury, 
death or equipment damage.

S

AFETY

 P

RECAUTIONS

!

WARNING:

Disconnect power to the unit before servicing. Follow all lock out/tag out procedures established by the user. Verify all 
power is off to the unit before performing any work. Failure to comply could result in serious injury, death or damage to 
the equipment.

CAUTION:

!

Always be sure to keep the area around the unit clean and free of clutter. Failure to keep this area clean may result in 
injury or equipment damage.

CAUTION:

!

Note the following: This unit is not designed for use in outdoor locations. The appliance must be placed in a horizontal 
position. The appliance is not suitable for installation in an area where a water jet would be used.

Содержание Adapter Lid









Отзывы: