Cornelius 221000250, Инструкция по установке и обслуживанию

Страница: 26 / 32

Repairs
Cornelius Deutschland GmbH
Document no. TD0004100
Version 01/07/2019, Index 1
Installation and service manual Tower
Nueva Style
24
7.10 Replacing the left/right front inserts and wrap film
NOTICE!
The procedure for replacing the front inserts and wrap film is identical and is described here using an example.
7.11 Replacing the soda dispenser (optional)
NOTICE!
Multiple soda dispenser variants are available for the unit. Replacing the soda dispenser is identical for all vari-
ants and is described here using an example.
Prerequisites References
The hood has been removed. see chapter 7.5
The taxi cab hood has been removed. see chapter 7.3
Spare parts ID/reference Qty/amount Comment
Front insert, left 220107124 1
Wrap film, left front insert 220107450 1 White
Wrap film, left front insert 220107452 1 Red
Wrap film, left front insert 220107454 1 Blue
Front insert, right 220107125 1
Wrap film, right front insert 220107451 1 White
Wrap film, right front insert 220107453 1 Red
Wrap film, right front insert 220107455 1 Blue
1. Remove the fastening bolts (Fig. 51/1) of the front insert (Fig. 51/2).
2. Remove the front insert (Fig. 51/2) from the front panel (Fig. 51/3).
3. Position the new wrap film on the new front insert.
4. Position the front insert (Fig. 51/2) within the front panel (Fig. 51/3).
5. Attach the front insert (Fig. 51/2) using the fastening bolts (Fig. 51/1).
Finishing tasks
1. Install the hood; see chapter 7.5.
2. Install the taxi cab hood; see chapter 7.3.
Fig. 51
1 2
3
Prerequisites References
The front panel has been removed. see chapter 7.9
The dispensing valves have been removed. See dispensing valve documentation
Spare parts ID/reference Qty/amount Comment
Soda dispenser 220099020S002 1 5 dispensing valves
Soda dispenser 220099020 1 6 dispensing valves
Soda dispenser 220099021 1 8 dispensing valves
1. Remove the large insulation from the soda dispenser.
2. Remove the tubes (Fig. 52/3) on the soda dispenser (Fig. 52/1).
3. Lift and remove the soda dispenser (Fig. 52/1) from the dispensing valve support (Fig. 52/2)
and from the unit in an upward motion.
4. Position the new soda dispenser (Fig. 52/1) within the dispensing valve support (Fig. 52/2) and
the unit.
5. Attach the tubes (Fig. 52/3) to the soda dispenser (Fig. 52/1).
6. Insulate the soda dispenser using the large insulation; see chapter 7.12.
Finishing tasks
1. Install the front panel; see chapter 7.9.
2. Mount the dispensing valves; see dispensing valve documentation.
Fig. 52
1
2
3