Repairs
Cornelius Deutschland GmbH
Document no. TD0004100
Version 01/07/2019, Index 1
Installation and service manual Tower
Nueva Style
22
7.6
Replacing the lighting kit
7.7
Replacing the LED strip and the voltage transformer
Finishing tasks
1. Install the lighting kit; see chapter 7.6.
3. Remove the fastening bolts (Fig. 45/1) from the hood (Fig. 45/2).
4. Remove the hood (Fig. 45/2) from the front panel (Fig. 45/3).
5. Position the new hood (Fig. 45/2) within the front panel (Fig. 45/3).
6. Attach the hood (Fig. 45/2) using the fastening bolts (Fig. 45/1).
7. Position the front panel (Fig. 44/3) with hood (Fig. 44/1) on the rear panel (Fig. 44/2).
8. Attach the front panel (Fig. 43/2) using the fastening bolts (Fig. 43/1).
Fig. 45
1
2
3
1
Prerequisites
References
The taxi cab hood has been removed.
see chapter 7.3.
Spare parts
ID/reference
Qty/amount
Comment
Lighting kit
Includes:
220112124
1
Velcro tape
Various
1. Remove the fastening bolts (Fig. 46/2) from the retaining plate (Fig. 46/1).
2. Remove the retaining plate (Fig. 46/1) with LED strip from the taxi cab hood.
3. If necessary, replace the LED strip and the voltage transformer; see chapter 7.7.
4. Position the retaining plate (Fig. 46/1) with LED strip within the taxi cab hood.
5. Attach the retaining plate (Fig. 46/1) using the fastening bolts (Fig. 46/2).
Finishing tasks
1. Install the taxi cab hood; see chapter 7.3.
Fig. 46
2
1
2
Prerequisites
References
The lighting kit has been removed.
see chapter 7.6.
Spare parts
ID/reference
Qty/amount
Comment
–
LED strip
(length: 450 mm)
220112038
1
–
Retaining plate
220112035
1
–
Voltage transformer
141647698
1
Velcro tape
Various
2. Remove the LED strip (Fig. 47/2) from the retaining plate (Fig. 47/1).
3. Remove any adhesive residue from the retaining plate (Fig. 47/1).
4. Disconnect the electrical cables (Fig. 47/3) (cable no. 220112038) on the voltage transformer
(Fig. 47/4).
5. Apply Velcro tape to the new voltage transformer (Fig. 47/4).
6. Connect the electrical cables (Fig. 47/3) (cable no. 220112038) of the new LED strip (Fig. 47/
2) to the voltage transformer (Fig. 47/4).
7. Apply the LED strip (Fig. 47/2) to the adhesive area on the retaining plate (Fig. 47/1).
Fig. 47
2
1
3
4
