Corghi INTELLI-WIND, Руководство оператора

Страница: 14 / 26

14
DESCRIPTION OF MENUS
Machine power-on self test
On power-up, the machine runs a self-test of the connected modules, and the
following screen appears on the display for a few seconds.
This is for the case where there are 2 single-side modules or 1 double-side
module connected; the display shows the connection of the first (1) and second
(2) side.
Any operating defects in one of these connected modules will be indicated by a
dash, as for the case of non-connected modules.
Subsequently, the display shows the total number of connected heads, and
immediately afterwards a screen appears with 2 items: "MENUS" and
"SETTINGS".
Speed set-up
To set up the speed, proceed as follows:
With the cursor positioned on the speed menu, press "ENTER" so that the cursor
shape changes to a curly bracket, then change the value using the "up" and
"down" arrow keys.
To confirm the changes made, press the "ENTER" key again.
It is also possible to set the synchronisation difference by proceeding as follows:
Change the value of the synchronisation difference in the same way as described
previously for the speed.
The speed can be varied from 300 to 1200 metres / minute in increments of 10
m/min: from 300 to 1000 metres / minute for 8" machines, and from 300 to 800
metres / minute for 10" machines.
The synchronisation difference can be set to "LOW", "MEDIUM", "HIGH" or
"NONE"; this last value means that there is no synchronisation difference.
Change recipe set-up
To change the parameter settings of recipe "x", proceed as follows:
where "x" is the number of the recipe that is being changed. To change the
recipe number, use the "ENTER" key and the "up" and "down" arrow keys to
increase or decrease the value, and then press "ENTER" again to confirm.
MENUS SPEED
MENUS SPEED
SYNCH. DIFF.
MENUS EDIT RECIPE X
SELF TEST
-12----