Corghi 4-109039, Руководство оператора

Страница: 14 / 48

14 User's manual BR2-C1E
tions, such as methods for tightening or loosening
the clamping devices. Do not attempt to carry
out procedures which exceed your level of pro-
ficiency, or which you do not have experience
with. Contact an authorised service centre for
assistance if necessary.
ShIPPING, SToRaGE
aND haNDLING
Machine handling conditions
The winder must be shipped in its original
packaging and kept in the position indicated
on the packaging.
- Size of packages (fig.1):
• width 1060 mm
• depth 760 mm
• height 1200 mm
- Weight BR2: 55 kg
Machine storage and handling
specifications
Temperature: -25° ÷ +55°C.
WARNING
To avoid damage do not place other articles
on top of the packaging.
Handling
To move the BR2, use the hook supplied with
the machine (fig.2).
Before lifting, the machine must be discon-
nected from the electrical and pneumatic supply
systems.
ATTENTION
Keep the original packaging; it could be useful
in the future for machine transfer.
INTRoDUCTIoN
The purpose of this manual is to furnish the
owner and operator a set of practical and safe
instructions for the use and maintenance of the
machine.
Follow all the instructions carefully and your
machine will assist you in your work, making it
easier and providing lasting and efficient service
in keeping with the CORGHI tradition.
The following paragraphs define the levels of
danger regarding the machine associated with
the warning captions found in this manual:
DANGER
Refers to immediate danger with the risk of
serious injury or death.
WARNING
Dangers or unsafe procedures that can cause
serious injury or death.
ATTENTION
Dangers or unsafe procedures that can cause
minor injuries or damage to property.
Read these instructions carefully before starting
the machine. Keep this manual and all illustrative
material supplied with the machine in a folder
near it where it is readily accessible for consulta-
tion by the operators.
The technical documentation supplied is consid-
ered an integral part of the machine; in the event
of sale all relative documentation must remain
with the machine.
The manual is only valid for the machine model
and serial number indicated on the nameplate
applied to the machine itself.
WARNING
Comply with the contents of this manual: any
uses of the machine that are not specifically
described are under the full responsibility of
the operator.
NOTE
Some of the illustrations in this manual have
been taken from photographs of prototypes; the
standard production model may differ slightly in
certain respects.
These instructions are meant for persons with a
certain level of mechanical expertise. We have
therefore left out descriptions of simple opera-