TigoBridge B1
User Manual
Copyright © 2021 CoreTigo Ltd.
Page
17
of
21
9.
Guidelines and Regulations
FCC ID: 2ATSM-TGBRIDGEB1
9.1. RF Exposure Warnings
Warning
: This device is authorized for use in a static application only. Always keep a distance of
at least 20 cm between theTigoBridge B1 device and the user's body.
9.2. Class A Warning
The FCC Wants You to Know
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in which case the
user will be required to correct the interference at his own expense
9.3. Modification Statements
FCC Warning (Modification statement)
CoreTigo LTD has not approved any changes or modifications to this device by the user. Any changes or
modifications can
void the user’s authority to operate the equipment.
9.4. FCC Regulatory Notices
Interference statement (if it is not placed in the device)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Wireless Notice
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and
meets the FCC radio frequency (RF) Exposure Guideline. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
