background image

3

  The latest user manual is available for download on the company website.

  When using Modular E70 series piezo controller, the user manual should be placed 

near the system for easy reference in time. If the user manual is lost or damaged, please 

contact our customer service department.

  Please timely add all the information given in the manufacturer's user manual, such 

as supplements or technical descriptions. 

  If your user manual is incomplete, it will miss a lot of important information, cause 

serious or fatal injuries, and cause property damage. You have read and understood the 

contents of the user manual before installing and operating the Modular E70 series piezo 

controller. 

  Only authorized professionals who meet the technical requirements can install, 

operate, maintain and clean the Modular E70 series of digital piezo controllers.

2.Features and Applications

Modular E70 can freely choose the number of cascaded modules according to the user's 

needs. The number of channels for a single module is 3 channels/module, and up to 32 

modules can be cascaded. It can be controlled by external analog signals or digital signals 

via RS-422 interface and optional servo control function.

2.1 Series

Model

Description 

Modular E70

Piezo controller, 6/9/12/.../96 channel optional, SGS sensor, 
Software control and analog input control

Содержание Modular E70 Series















Отзывы: