Coredy R500+, Руководство пользователя

Страница: 12 / 30

3.2 Quick Start
Charging Dock Position
Place the Charging Dock against the wall and make sure
it is in an open and uncluttered area leaving at least:
Place the Charging Dock on a hard
level surface and against a wall.
2 meters (6 feet) in the front of the Charging Dock.
1 meter (3 feet) on both sides of the Charging Dock.
Attach Side Brushes to the bottom of Coredy R550 (R500+ ) by
pressing a brush into each slot until it clicks.
Plug in the Charging Dock and place
the remaining wire into the trunking
at the bottom of the Charging Dock
1.
3.
2.
Install Side Brushes
4.
Activate the Robot
Place Coredy R550 (R500+ ) onto the Charging Dock, making
sure the metal charging contacts on the Charging Dock match
up with those underneath the robot.
If successful, you will hear a series of tones. Once the Power
button illuminates, Coredy R550 (R500+ ) is ready for use.
5.
10
Initial Use, Switch on the Power Button on the Bottom. Note:
Note:
Failure to place the remaining wire
into the trunking, may cause Robot to
become stuck while charging or cleaning.