Rebooting Instructions
Robot will tell you something is wrong with a two-tone distress sound followed by message. The indicator will also blink or lit red. Refer to
the chart as below to resolve Robot’s problem. If the problem is not resolved, please contact our COST FREE customer service team for more
assistance.
For some errors, rebooting Robot may resolve the problem. To reboot Robot, press the power button on the bottom on Robot, you will hear an
audible tone signifying a successful reboot.
5 Troubleshooting
25
Indicator Lighting Red
Clean the front driving wheel, then press the
power button to restart the robot.
Robot's front driving wheel is stuck.
One beep
Clean the side brush, then press the power
button to restart the robot.
Robot's side brush is stuck.
Two beeps
Remove and empty robot's dust bin.
Clean robot's filter, then briskly tap the bin to
loosen any remaining trapped debris.
Make sure the vacuum inlet is not blocked by
any hair or debris.
Robot's vacuum fan is stuck
or its filter is clogged.
Three beeps
Indicator Lighting Red
Robot Blinks and Says
Likely Cause
What to Do
Содержание R300
Страница 1: ...Coredy R300 Owner s Manual ...