4.5 Clean Robot's Floor Tracking
Sensor
4.6 Clean Robot's Rolling Brush
Use a clean, dry microfiber or soft cotton cloth to wipe
any debris that has accumulated in the round sensor
opening on the right side of the bottom surface.
Do not spray cleaning solution directly into the sensor
entrance.
Pull on the release tabs to unlock the brush guard
as shown.
1.
Lift the rolling brush to remove.
2.
Clean the rolling brush with the provided cleaning
tool or a vacuum cleaner.
3.
Reinstall the rolling brush by inserting the fixed
protruding end first and then clicking into place.
4.
Press down to snap the brush guard into place.
5.
28
