Firmware Update Function:
The packs are equipped with a USB port which serves as an 5v output (for charging/powering devices) as
well as a firmware update port. In the event of a firmware update, connect a USBA-USBA cable to the
battery pack, and a PC or MAC. Once connected, you will see the LED on the bottom of the pack flash
RED and GREEN. A folder will present on your Desktop and drag/drop the updated firmware packet into
the folder. Firmware updates will take up to 30 seconds, but best to wait 1 minute prior to disconnecting
the pack from the computing device. To disconnect, drag the firmware update folder into the Recycle bin,
similar to disconnecting a Flash Drive. It is then safe to disconnect the pack from the computing device.
Notes on Use:
•
An increase in temperature is normal during charging and discharging.
•
Make sure to keep battery contacts clean.
•
Do not attempt to disassemble the battery. Please contact Core SWX for any service issues.
•
Keep batteries separated when transporting.
•
Keep battery pack dry and avoid use in humid environments.
NEO9S and NEO9AG Air Transport Compliance
The battery pack models listed above is suitable for air transport as a non-hazardous article under the
regulations of the IATA, the ICAO, and the UN. The packs contain less than 8 grams of equivalent lithium
content. This quantity is in compliance
with section A45-2* of the Hazardous Substance Standards of the
ICAO. The
The packs are suitable for air transport as a non-hazardous article.
* Section A45-2: Lithium cells and
lithium batteries are not subject to these instructions
if they meet the following requirements: For a lithium
ion battery the aggregate equivalent content is not more than 8g.
Specification Data:
NEO9S: V-mount Connection
NEO9AG: 3-Stud Mount Connection
Capacity:
98Wh(14.8v, 6.6Ah)
Size:
3.54” x 4.65” x 1.90”
Weight:
1.4lbs.
Normal Runtime:
(25w) 3.6hrs.
Load:
16A peak/12A continuous
Содержание NEO9S AG
Страница 1: ...NEO9S AG Battery Pack Instructional Manual...
