Core CHT 410, Руководство по обслуживанию

Страница: 11 / 16

1. Place first WEAR WASHER (pic 2)
2. Screw down Blade Support (pic 3)
3. Place first BLADE (bend down ‐ pic 4)
4. Brush with grease ‐ then spin on CAM GEAR (pics 5,6)
5. Brush again ‐ then place second BLADE (pics 7,8)
6. Rotate CAM GEAR one complete turn to ensure
gears spin freely, and blades are following both CAMS,
leave gear so cam is to the extreme left, or right, to
Leave the smallest gap possible in slots. (pic 8)
7. Add grease to back corners. (pic 9)
8. Place second Wear Washer. (pic 9)
Hardware Required
‐ 2 Wear Washers
‐ 2 Blades – 2 blade supports (top, bottom)
‐ (2) ¼ ‐ 20x .625 Flathead Machine Screws
‐ Cam Gear
‐ Motor/gear box assembly
‐ Grease
Tools Required
‐ Brush
‐ Allen Wrench ‐ hex 5/32
1. 2. 3.
4.
5.
6.
7. 8. 9.
Gear/Blade Assembly