22
P5
P1 P3 P2
P4
P5
P1 P3 P2
P4
Request to Exit
(with door contact)
Orange
Brown
White
Normally
Open
Switch
Door
Contact
(Normally Closed)
Orange
Brown
White
Normally
Open
Switch
Request to Exit
(no door contact)
Installation and Wiring Instructions for Corbin Russwin WM800
3.8 Wiring the REX (Request to Exit) Switch
The WM800 unit can be wired to monitor a remote switching device, which is
intended to be installed on the secure side of a door. The Request to Exit (REX) loop is a
momentary input that engages the lock output for the same length of time for which it is
programmed. This feature can be stored in the Transaction Log for viewing.
If you elect to perform a secure installation where the controller is mounted on the secure
side of the door, you can use the filler piece as a REX switch. (See page 14, Figure. 8)
Other REX devices can be used to include a remote button placed at a receptionist desk, a
press-to-exit switch on the inside of a door, or
a passive infrared detector, allowing free
and convenient egress. The external REX feature requires no programming; simply wire
the unit as illustrated in Figure 16. To incorporate this feature, follow the steps below:
1. Turn OFF power to the WM800 unit, and then unlatch the keypad from the
plastic housing.
2. Locate connector P2 on the main circuit board.
3. Plug the 6-conductor harness into connector P2. (NOTE: The 2-pin
jumper on pins 5
and 6 of connector P2 must be removed first. SeeFigure16.)
4. If you do not wish to install the door contacts per Figure 16, twist the white wire
and the orange wires and wire nut together. This is mandatory. If this is not
done, the REX input will not function.
NOTE: The door contact MUST be closed for the REX feature to work properly.
Figure 16 Wiring the REX Switch
Branding Guidelines For Installation Instruction Sheets
Endorsed Logo
* Must Be Used On All Single Page and Multiple Page Installation Instruction Sheets
Group Brand Tagline
* Must Be Used On The Bottom Left Of
ALL ONE PAGE
Installation Instruction Sheets
* Must Be Used On The Bottom Left Of
ALL INSIDE
PAGES
of Multiple Page Installation Instruction Sheets
* It is
NOT USED
On The Back Page Or Back Cover Of Installation Instruction Sheets
* Image Must Be Used - CANNOT Be Typed
Corporate Statement
* Must Be Used On The
BACK PAGE
Or
BACK COVER
Of All Multiple Page Installation Instruction Sheets
* Image Must Be Used - CANNOT Be Typed
* A 2 line Version and a 5 Line Version Of The Corporate Statement Image Are Available
Copyright Statement
* Must Be Used On The Bottom of
ALL ONE PAGE
Installation Instruction Sheets
* Must Be Used On The Bottom of The
BACK PAGE
OR
BACK COVER
Of All Multiple Page Installation Instruction Sheets
* Copy Can Be Typed
Copyright © 2008 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.
Note: Marketing will continue to be part of the instruction sheet and template reviewing process
mlw - 07/25/08
Branding Guidelines For Installation Instruction Sheets
Endorsed Logo
* Must Be Used On All Single Page and Multiple Page Installation Instruction Sheets
Group Brand Tagline
* Must Be Used On The Bottom Left Of
ALL ONE PAGE
Installation Instruction Sheets
* Must Be Used On The Bottom Left Of
ALL INSIDE
PAGES
of Multiple Page Installation Instruction Sheets
* It is
NOT USED
On The Back Page Or Back Cover Of Installation Instruction Sheets
* Image Must Be Used - CANNOT Be Typed
Corporate Statement
* Must Be Used On The
BACK PAGE
Or
BACK COVER
Of All Multiple Page Installation Instruction Sheets
* Image Must Be Used - CANNOT Be Typed
* A 2 line Version and a 5 Line Version Of The Corporate Statement Image Are Available
Copyright Statement
* Must Be Used On The Bottom of
ALL ONE PAGE
Installation Instruction Sheets
* Must Be Used On The Bottom of The
BACK PAGE
OR
BACK COVER
Of All Multiple Page Installation Instruction Sheets
* Copy Can Be Typed
Copyright © 2008 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.
Note: Marketing will continue to be part of the instruction sheet and template reviewing process
mlw - 07/25/08
