Press in the joint covers between the appliance
and the kitchen unit.
Apply covers (B) on joint cover lugs and into
hinge holes.
Position the runners (A) at the top and bottom
of the inside of the kitchen unit as shown in Fig.
and mark the position of the external holes.
After preparing the holes, screw the runners to
the kitchen unit door using 3.5x16 mm screws.
D724
D726
B
PR33
20mm
A
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
D265
A
D
C
D723
If after having carried out the previously
described operation there is still some space
left between the appliance and the kitchen unit,
fit the trimming provided together with the
appliance on the stop strip (A).
Open the door and push the appliance against
the side of the kitchen unit opposite to that of
appliance hinges.
Fasten the appliance with 4 screws provided in
the kit included with the appliance. Snap vent
grille (C) and hinge cover (D) into position.
15
