CONTENTS
GB
Installation
■
Positioning
■
Cleaning the interior
■
Instructions for totally built-in
appliances
■
Electrical connection
Technical specification
Use
■
Starting
■
Quick-freezing
■
Warning light
■
Freezing fresh food
■
Storage of frozen food
■
Thawing
■
Ice-cube production
■
Temperature regulation
■
Fresh food refrigeration
■
Movable shelves
■
Positioning the door shelves
■
Defrosting
Maintenance
■
Periodic cleaning
■
Periods of non use
■
Replacing the interior light bulb
Defective operation
13
13
13
14
16
16
17
17
17
17
17
18
18
18
18
18
18
19
19
20
20
20
20
20
13
INSTALLATION
If this appliance featuring magnetic door
seals is to replace an older appliance having
a spring lock (latch) on the door or lid, be
sure to make that spring lock unusable
before you discard the old appliance. This
will prevent it from becoming a death-trap
for a child.
Positioning
The appliance should be installed well away
from sources of heat such as radiators, boilers,
direct sunlight etc. Best performance is
obtained with ambient temperature between
+18°C and +43°C (class T); +18°C and +38°C
(class ST); +16°C and +32°C (class N); +10°C
and +32°C (class SN). The class of your
appliance is shown on its rating plate.
For building into kitchen units follow the special
“ Building-in” instructions given.
Important
It is essential that the appliance be connected
to an efficient earth tap. For this purpose the
supply cable plug incorporates a special earth
contact. If the sockets of your domestic wiring
system are not earthed, have the appliance
connected to a separate earth wire by a
qualified electrician in accordance with existing
safety regulations.
The Manufacturer declines all responsibility
if the above safety precautions are not
observed.
This appliance complies with EEC directive
number 87/308 of 2/6/87 relative to radio
interference suppression.
This appliance complies with the
following E.E.C. Directives:
- 73/23 EEC of 19.2.73 (Low Voltage
Directive) and subsequent mod)fications;
- 89/336 EEC of 3.5.89 (Electromagnetic
Compatibility Directive) and subsequent
modifications.
GB
Cleaning the interior
Before using the appliance for the first time,
wash the interior and all internal accessories
with lukewarm water and some neutral soap so
as to remove the typical smell of a brand-new
product, then dry thoroughly. Do not use
detergents or abrasive powders, as these will
damage the finish.
