Wet/Dry Filtration
Observe and make sure that the water circulation is
flowing properly from the aquarium section through
the wet/dry section.
Step 1:
Water proceeds into surface and bottom intake.
Step 3:
Water flows into the overflow tray, trickles down the
bio-balls and through the bio-ball strainer.
Step 2:
Water passes through filter cartridge.
Step 4:
Water goes through the sponge filter into
the water pump.
Step 5:
Water is pumped into the aquarium through the
output discharge nozzle.
PRECAUTIONS:
For optimal filter performance
1. Do not block or obstruct surface intake and
bottom intake.
2. Do not block or obstruct output discharge nozzle.
3. Perform scheduled maintenance on filter cartridge.
4. Observe scheduled maintenance on water pump.
5. Make sure to perform scheduled water changes
and BioCube filtration maintenance.
OPERATION
FIGURE 16
FIGURE 17
FIGURE 13
FIGURE 14
FIGURE 15
Surface Intake
Bottom Intake
Filter Cartridge
(Mechanical
Filtration
and Chemical
Filtration)
Bio-Balls
(Biological
Filtration)
Output
Discharge
Nozzle
Sponge Filter
(Micro-Bubble
Diffuser)
Water Pump
