Copystar ECOSYS P6030cdn, Руководство по эксплуатации

Страница: 66 / 82

4-4 Troubleshooting
Black or white vertical streaks Check the operation panel for toner.
If the
Toner low C,M,Y,K
message is displayed with color description,
install a new toner kit for the color. To replace the toner container, refer to
Toner Container Replacement on page 3-2.
Clean the main charger units.
For details, refer to
LSU/Charger (LSU/Main charger cleaning mode
setting) section of the Advanced Operation Guide .
Refresh drum.
Perform the following procedures on the operation panel and try cleaning
the drum surface using the printer's built-in cleaning system.
1 Press [MENU] .
2 Press  or  repeatedly until
Adjust/Maintenance >
appears.
3 Press  . Press  or  repeatedly until
>Service >
appears.
4 Press  . Press  or  repeatedly until
>>Drum
appears.
5 Press [OK] twice.
6 The message display shows
Please wait
. After approx. 3 minutes,
the display returns to
Ready
.
Faint or blurred printing Clean the main charger units.
For details, refer to
LSU/Charger (LSU/Main charger cleaning mode
setting) section of the Advanced Operation Guide .
Make sure the paper type setting is correct the paper being used.
For details, refer to
Paper Settings section of the Advanced Operation
Guide .
Conduct color calibration either by switching the printer off then on or using
the printer operation panel.
For details, refer to
Color Calibration section of the Advanced Operation
Guide .
Try adjusting the color control settings using the printer driver.
Check the operation panel. If the
Toner low C,M,Y,K
message is
displayed with color description, install a new toner kit for the color. To
replace toner, refer to
Toner Container Replacement on page 3-2.
Refresh drum.
Perform the following procedures on the operation panel and try cleaning
the drum surface using the printer's built-in cleaning system.
1 Press [MENU] .
2 Press

or

repeatedly until
Adjust/Maintenance >
appears.
3 Press  . Press  or  repeatedly until
>Service >
appears.
4 Press

. Press

or

repeatedly until >>Drum appears.
5 Press [OK] twice.
6 The message display shows
Please wait
. After approx. 3 minutes,
the display returns to
Ready
.
Printed Results Corrective Action
Direction
of Paper
Feed