background image

-  4  - 

S

AFETY

 R

ULES 

 

SAVE THESE INSTRUCTIONS 

GENERAL SAFETY RULES 

1.

 

For  safe  operation,  read  and  understand  all  instructions  before  using  this  product.  Follow  safety 
instructions.  Failure  to  follow  all  safety  instructions  listed  below,  can  result  in  serious  personal 
injury. 

2.

 

Do not allow children or untrained individuals to use this unit. 

3.

 

Wear safety glasses or goggles that are marked to comply with Australian standards and hearing protection when 

operating this unit. 

4.

 

Wear heavy long pants, boots, and gloves. Do not wear loose fitting clothing, short pants, jewelry of 
any kind, or go barefoot. 

5.

 

Secure long hair so it is above shoulder level to prevent entanglement in any moving parts. 

6.

 

Keep all bystanders, children, and pets at least 50 ft. (15 m) away. 

7.

 

Do  not  operate  this  unit  when  you  are  tired,  ill,  or  under  the  influence  of  alcohol,  drugs,  or 
medication. 

8.

 

Do not operate in poor lighting. 

9.

 

Keep  firm  footing  and  balance.  Do  not  overreach.  Overreaching  can  result  in  loss  of  balance  or 
exposure to hot surfaces. 

10.

 

Keep all parts of your body away from any moving part. 

11.

 

When  using  the  attachment  on  a  trimmer  with  a  gasoline  engine,  do  not  touch  areas  around  the 
muffler  or  cylinder  of  the  power  head,  these  parts  get  hot  from  operation.  Failure  to  do  so  could 
result in possible serious personal injury. 

12.

 

Always  stop  the  engine  and  remove  the  spark  plug  wire  or  disconnect  from  power  supply  before 
making any adjustments or repairs except for carburetor adjustments. 

13.

 

Inspect unit before each use for loose fasteners, damaged or missing parts. Correct before using the 
edger attachment. Failure to do so can cause serious injury. 

14.

 

Use only original manufacturer’s replacement parts. Failure to do so, may cause poor performance, 
possible injury, and will void your warranty. 

15.

 

Do  not,  under  any  circumstance,  use  any  attachment  or  accessory  on  this  product,  which  was  not 
provided  with  the  product,  or  identified  as  appropriate  for  use  with  this  product  in  the  Operator’s 
Manual. 

16.

 

Avoid dangerous environment. Do not use the attachment in damp or wet locations. 

17.

 

Do not use in rain. 

18.

 

Use the right attachment, do not use attachment for any job except that for which it is intended. 

 

SPECIFIC SAFETY RULES FOR EDGERUSE 

1.

 

Clear the work area before each use. Remove all objects such as rocks, broken glass, nails, wire, or 
string which can be thrown or become entangled in the edger blade. 

2.

 

Be sure all guards are properly and securely attached. 

3.

 

Replace dull or worn blade; do not attempt to sharpen. 

4.

 

Use this edger for edging along sidewalks, driveways, flower beds, and similar areas. Do not use for 
any other purpose. 

 

 

  WARNING

 

Read  and  understand  all  instructions. 

Failure  to  follow  all  instructions  listed  below,  may 

result in electric shock, fire and/or serious personal injury. 

Содержание EA-LG-01












Отзывы: