FTT-UV - Revision A - Released September 25, 2020 - Copernicus Educational Products Inc.
8
®
Using the UV Tech Tub
How to disinfect an item
To use the UV Tech Tub® for surface disinfection, first ensure that the product is
plugged in (A) and the power switch (B) is turned on.
Once the power switch has been turned on, the green power indicator light (C)
on the door will illuminate, indicating the unit is on.
Place the item (laptop shown) on the rack in the center of the chamber.
Be careful to not hit the lamps in the upper corners.
Ensure that items like laptops are open so that the display and keyboard
are exposed. Ensuring that all surfaces are exposed as much as possible is
critical for proper surface disinfection. Surfaces that do not receive UV
radiation will not be disinfected.
If visibly soiled, wipe down prior to running disinfection cycle. Dirt, dust,
and debris can impact disinfection effectiveness.
Close the door and ensure that the latch (D) is fully engaged. A disinfection cycle
cannot be started if the door is not closed fully.
With the power indicator light (C) illuminated, press the red cycle start button (E)
to begin 1-minute disinfection cycle. During the cycle, the red cycle start button
light will remain illuminated and the UV bulbs inside will turn on.
The red cycle start button light (E) and bulbs inside the chamber will turn off
when the disinfection cycle is complete.
Your item has now been disinfected!
If the door is opened during the disinfection cycle, the lights will
immediately shut off. Restart the disinfection cycle by closing the door
and pressing the cycle start button.
(D)
(E)
®
How to carry the UV Tech Tub
®
There are two ways to carry the UV Tech Tub
: the flip-up handle on the top (F) or the two handles on the door and back (G).
®
Ensure that the power cord is unplugged and wrapped around the cable hooks on the back of the UV Tech Tub (H).
(G)
(F)
(H)
(C)
FTT-UV
(A)
(B)
(F)
