24
Network Camera User Manual
4.4.3
Alarm Out
Go to Config
Alarm
Alarm Out interface as shown below:
Select alarm holding time at the “Alarm Holding Time” pull down list box.
Click “On” to trigger alarm out. Click “off” to stop alarm out.
Click “Save” button to save the settings.
4.4.4
Alarm Server
Go to Alarm
Alarm Server interface as shown below.
You may input the alarm server address and port. When the alarm happens, the camera will
automatically transfer the alarm event to the alarm server. If the alarm server is not used, there
is no need for you to configure here.
4.5
Network Configuration
4.5.1
TCP/IP
Go to Config
Network
TCP/IP interface as shown below. There are two ways for network
connection.
Use IP address (take IPv4 for example)-
There are two options for IP setup: obtain an IP
