COP-USA DVR H.264 E4, Руководство пользователя

Страница: 20 / 39

420
monitoring, system maintenance, PTZ and network setting.
1. ALARM SETUP
Move the cursor to
Ǐ
ALARM SETUP
ǐ˄
Icon highlighted when selected
˅ˈ
press
Ǐ
Enter
ǐ
to enter
into setting interface.
I/O CHANNEL
˖
Each channel corresponds an I/O status, that is, when an alarm triggered, it will
activate the corresponding channel to start alarm recording.
N.O
˖
indicate I / O input level from high to low effective
N.C ˖ indicate I / O input level from low to high effective
HDD LOSS
˖ ON means it will trigger a alarm if there is no HDD, and it will display an Ǐ H ǐ
On the bottom left of channel 1 in the live view
HDD SPACE
˖
ON
˖
If the space less than 500M, there is a remark in live view
˖
No enough space,
please change HDD after shutdown.
VIDEO LOSS
˖
ON
˖
when one channel has no video input, it will display “video loss”in live view.
ALARM MANAGE
˖ There are alarm output, buzzer and post REC three items.
OUTPUT ˖ when an alarm triggered, the alarm output time will be:
0 second ǃ 10 seconds,20 seconds,40 seconds and 60 seconds
ƽ BUZZER ˖ buzzer calling time setup when alarm triggered: 0 second,10 seconds,20
seconds,40 seconds and 60 seconds
ƽ
POST REC.
˖
post recording time setup: 30 seconds,1 minute,2 minutes and 5
minutes
ƽ PRE REC ˖ Pre-recording time is fixed as10 seconds.
2. SYSTEM INFO
Move the cursor to
Ǐ
SYSTEM INFO
ǐ˄
Icon highlighted when selected
˅ˈ
press
Ǐ
Enter
ǐ
to enter
into setting interface, at this interface mainly display system hardware features and firmware version,
include : device type, firmware version, MAC address
ǃ serial number.