Description of
Functions
14
e
Character Overlapping. The humane structure of the menu makes all
setups and programming of the dome camera more convenient and easy.
f
Angle display. The dome could display the panning angle, tilting angle and
the view angle of the camera.
g
Proportional pan function. The speed dome will depend on the amount of
zoom. At telephoto zoom settings, the pan and tilt speeds will be slower for
a given amount of joystick deflection than at wide zoom settings. This keeps
the image from moving too fast on the monitor when there is a large amount
of zoom. This slowing does not happen when going to a preset, but does
occur in turbo mode when high zoom is selected. The minimum pan and tilt
speeds are 0.1 degree per second at full zoom.
h
The Integrated Multi-Protocol. Multiple communication protocols are
integrated inside the dome camera with selectable baud rate from 2400 bps
to 19200 bps.
i
Electrify Return. Electrify return to the situation before shut.
j
Menu Password Protection function. Input password to enter the menu,
such function ON/OFF for optional.
k
The dome title display. The dome title could be set to display in the dome
menu.
l
Temperature display. The temperature could be set to display in the dome
menu.
m
Alarm Function. Four-channel Alarm Input, One-channel Alarm Output.
n
Long-distance Address Modify Function. To modify the dome address by
RS485. Principle: we call "hard ID (HID)" that setting by the Dip-switcher,
and "Soft ID (SID) that setting by the Long-distance address modify. The HID
and the SID are same in leaving factory. For example: Camera No.001,
HID=SID=001, we change the SID=002 by RS485, so we should select the
No. 002 to control it, and the SID address will be remember after shut. And
if we change the HID=003 by Dip-switcher, the HID and the SID will be both
change to HID=SID=003.
