COP-USA CD55NV-DSP-09 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 44

COP-USA CD55NV-DSP-09 Скачать руководство пользователя страница 19

IMPORTANT
SAFEGUARDS

IMPORTANT SAFEGUARDS

All the safety and operating instructions should be read before the units

is operated.
During the course of transportation, storage and installation, the product
should be avoided from incorrect operations such as heavy pressing,
strong vibration etc., which can cause damage of product as there are

sophisticated optical and electronic devices inside the machine.
Do not attempt to disassemble the camera. In order to prevent electric
shock, do not remove screws or covers. There are no user-serviceable

parts inside.
Always follow all electrical standards for safety when it is in operation.
Adopt the particular power supply which is provided with the unit. RS-485
and video signal should keep enough distance with high voltage equip-
ments and cables when they are in transmission. Precautions for anti-

lightning and anti-surging should be taken if necessary.
Do not operate it in case temperature, humidity and power supply are

beyond the limited stipulations.
Do not let the camera aim at the sun or the object with extreme light
whatsoever it is switched on or not. Do not let the camera aim at or

monitor bright and standstill object for a long time.
Please do not make any operation to the product if you meet any trouble
with it, please find the trouble with this manual, if you can not find the
trouble please ask the professional person to repair it. Only the autho-
rized person by our company could repair this product.

1

2

3

4

5

6

7

12

«
...
17
18
19
20
21
...
»

Содержание CD55NV-DSP-09













































Отзывы:

Нет отзывов