manualshive.com logo in svg

COP Security Symphony, Руководство пользователя, Страница: 16 / 24

Поделиться
Скачать
COP Security Symphony Скачать руководство пользователя страница 16

16

User Access

When logged into the DVR, you will be now be able to operate the system using the 
Keyboard as if you were using the front panel of the DVR itself. 

(The Copy function is obviously not available on a remote Keyboard) 

The Text 

below

 each button denotes its function when using for DVR control.  

View

To select the on screen format press 

 VIEW 

Each time the button is pressed the display will change to the next available format.

          Sequential  - displays the image from each camera, full screen, sequentially.
Picture in Picture - displays two camera images simultaneously, (one within the other). 
 

 

  (these will have been pre-defined by the engineer).

                   4-Up  - displays the images from four cameras simultaneously.
          *        9-Up - displays the images from nine cameras simultaneously.
          *      16-Up - displays the images from sixteen cameras simultaneously.   

Repeat until the screen displays the cameras as required.  

                                  
    * where available on DVR.

Each camera can also be selected to display as a Full Screen image. Type in the 
number of the camera required on the number keypad then press ENTER. 

Live

To view live images (i.e. exit playback) press 

 LIVE 

Содержание Symphony

























Отзывы:

Нет отзывов