COP Security Symphony, Руководство пользователя, Страница: 10 / 24

10
Make all the 485 Buss connections in a “daisy chain” configuration as shown.
Power up the domes and the DVR.
Establish the protocol and Baud rate being used by the system RS485 Buss to control
the speed domes. (see 485/232 details in the System Settings menu of the DVR).
Set the protocol and baud rate of the keyboards to be the same as rest of the system
using the Dil switches on the rear of the Keyboards (refer to page 4 for settings).
Set the PTZ ID’s of each dome camera connected. (refer to Camera setting: PTZ in the
Engineer Manual). Each camera must have a unique ID.
e.g. Camera 1: PTZ ID 001, Camera 2: PTZ ID 002 etc.
If the Keyboards are to be used to control and operate the Symphony DVR, assign the
DVR with a unique ID. e.g. ID 101 (see page 5).
Switch on the power to the Keyboards.
The Keyboards will initialise then default to providing PTZ control.
Current CamID:001
PELCO_D 2400bps
Display:
Any of the keyboards can now be used to control and operate the connected speed
domes. (see page 19 for details).
Press the Function button F3 on any of the Keyboards and the operating Mode for that
Keyboard will change to provide Symphony DVR control. (see page 12 for details)
Addr: 00001
* DVR-SHE *
Display:
Note: Only one keyboard can have control of the system at any one time.