47
10. SPOT
1) You can setup SPOT Monitor display.
2) Press [SPOT] button to show up SPOT Monitor setup
window.
3) On the TYPE menu, press [ENTER] button to show up sub-
setup window.
- CHANNEL : select a camera to display.
- SEQ SINGLE : sequence display of single camera.
- SEQ QUAD : sequence display of every 4 cameras.
- SEQ STOP : stop sequence display
4) On the TYPE menu, select CHANNEL to display and press [ENTER] button to confirm the
selection. You can select 1challen for this function. Press [MENU] button to complete the
setup. .
* Setup duration of Spot Monitor should be referred to SPOT DWEL/SPOT QUAD DWELL
on 14, 15page.
11. PIP(Picture in Picture)
1) Press [PIP] button to show up 1ch small screen
in main screen.
2) Select the camera number of small screen, and press
[PIP] button again to change main screen and small screen.
3) Move to the location of the small screen by using (
▲
)(
▼
)
(
◀
)(
▶
) buttons.
4) Press Division button to close PIP.
12. POP(Picture on Picture)
1) Press [POP] button to display 1 main screen with 7 small
screen.
2) Select camera number of the main screen by controller
and other small screen numbers will be changed in order
automatically.
Example ) if you change main screen 13. other 7 small
screen will be changed to 14,15,16,1,2,3,4.
3) Press Division button to close POP.
TYPE : <-CHANNEL>
CHANNEL : -01
ACTION TYPE
- CHANNEL
- SEQ SINGLE
- SEQ QUAD
- SEQ STOP
10. SPOT / 11. PIP(Picture in Picture) / 12. POP(Picture on Picture)
