High Speed Dome Camera Introduction Manual
47
▌▌
TIMING ACTION
TIMING ACTION allows the user to set up the actions of the
dome in 7 days (each day with 8 timing segments). When
fishing the setup, the dome will do the actions according to
the setup motion during the defined time segment.
1. NO.:
Here shows the day within a week. Move the cursor here
and press IRIS OPEN to enter. Move joystick up or down
to select the Serial No. (1-8) for the timing action. Press
IRIS OPEN to confirm.
2. START:
To set up the start time for the defined motion within this
time segment. Press IRIS OPEN to confirm.
3. STOP:
To set up the stop time for the defined motion within this
time segment. Press IRIS OPEN to confirm.
4. MOTION:
To setup the motion that will be operated in this time
segment. The motion includes: NONE. PRESET 1-8,
SCAN 1-4, SEQUENCE 1-4 and PATTERN 1-4.
5. ON/OFF:
Move the cursor here and press IRIS OPEN to enter to
enable or disable this function. Press IRIS OPEN to
confirm.
6. COPY:
The user could set up each 8 segment of 7 days
separately or can copy the finished setting for one day to
the current day. Move the cursor there and press IRIS
OPEN to copy the settings.
7. BACK:
Press IRIS OPEN to save and be back to last menu.
NOTE
: It is not allowed to set up the same time segment
during one day. And the time segment can not exceed 00:00.
During the timing action segment, the defined action will be
stopped if the user moves the dome. If there is operation
during the defined time segment, the action will re-activated
as long as it is in the defined timing action segment.
