c. Press the configured trigger button. After setting up successfully, it will exit the
configuration mode automatically (or press the PS4
button / X1
button / NS
Pro
button once more to exit).
3.Whole elimination
a. Press the PS4
button / X1
button / NS Pro
PS4
button /
X1
button / NS Pro
button at the same time and release to enter the auto combo
function configuration mode.
b. Hold down the PS4
button / X1
button / NS Pro
button for 3 seconds, all the
configured auto combos will be eliminated automatically, and it will exit the configuration
mode automatically.
4.Button support
All buttons except the PS4
button / X1
button / NS Pro
button and the rocker can
be used for triggering. All buttons except the PS4
button / X1
button / NS
Pro
button can be used for recording.
D
、
Auto infinite loop function (off by default)
This function can perform infinite loop functions on selected buttons. When the button is
pressed, the button is locked in the held down state until the button is pressed again and
released. This function can achieve an infinite automatic operation of one button.
Note: When using the infinite loop function, if you want to perform other function
configuration, you need to stop the infinite loop state.
1.Turn on the infinite loop function of the button
(Please do not enter configuration mode in the loop state)
a. Press the PS4
button / X1
button / NS Pro
at the same time and
release to enter the infinite loop function configuration mode.
b. Perform the operation that needs to be cycled, and the device will automatically record
the operation. (it can record 8 groups of combo at most, 5 seconds of each combo at least,
and the operation will not be shielded)
c.Press the PS4
button / X1
button / NS Pro
button
