Section 5
Menu Function
18
5
Rest
The REST function will
restore all factory set values
.
Any changes made to the displayed temperature, unit readings and controller value will be reset.
Note: Calibration value in the TUNE option will remain and not be reset.
Follow these steps to navigate in the REST option.
Action
Key
Display
Press and hold UP+DOWN key for 3 seconds to
enter the menu.
The first menu “UNIT” will appear in the display.
Press DOWN key until the option “REST” appears
in the display.
Press and hold set-point key to change values.
While holding the set-point key in, press either the
arrow UP or arrow DOWN key.
When the display shows “-----“, *let go of the set-
point key.
Press and hold UP+DOWN key for 3 seconds to exit
the menu.
*This means all factory values have now been restored.
.
r E S t
- - - -
